Blasting process in steel structure manufacturing

Rust is an important process of steel structure manufacture, if the treatment effect is not good, it will directly affect the steel structure engineering in a structure of quality and quality. The process and principle of the rust blasting machine briefly, promote mutual learning and improve.

The steel structure housing shot blasting machine, the cleaning process can be controlled by the electric control roller will steel or steel into the cleaning machine room in the projection area, every aspect from different coordinate range of intensive projectile attack and friction, so that the scale, rust and dirt quickly fall off, steel the surface roughness of the surface must obtain a smooth, clean up in the outdoor on both sides of the import and export of loading and unloading roller.

In the steel above with rust dust blowing device by blowing, dust fall by a mixture of pills to recovery spiral conveying chamber funnel, vertical screw conveyor together to hoist the lower, then ascend to the separator on the top of the machine, after the separation of pure projectile into separator in the hopper, for shot blasting recycling.

Dust blasting, the exhaust pipe sent to the dust removal system, the purification process after the net gas discharged into the atmosphere, the granular dust was collected.

Last one：Basic requirements of steel structure foundation?
Next article：The advantages of structural workshop