1: the thickness of 2-3mm, specifications for 60mm*80mm or 80mm*80mm (mainly according to the actual size of the sun room to determine the steel specifications, models) steel pipe, in accordance with the contract size and actual needs of welding steel skeleton. In accordance with actual needs, steel pipe can use more thickness, higher specifications of the steel pipe. Before welding, the steel pipe shall be well treated with rust proof to ensure that the steel pipe will not rust. In the welding process, the joints of the steel pipe joint should be ensured to be full, loose and seamless. After the welding of the steel skeleton is completed, the safety of the sunlight room can be guaranteed. In the use of the security can withstand wind and rain attacks, it is important that the sandstorm weather in the north.
2, according to the actual size of finished production side doors and windows, install the top, top sun made according to the contract requirements (tempered glass top, hollow glass, coated glass, insulation color plate etc.); doors and windows can do plastic doors and windows or doors and windows broken bridge Aluminum Alloy.
3, then sealed, with foam sealing in the sun room each connection point. In order to ensure the latter does not leak. Sealing processing requirements must be carried out in a sunny day, rainy day is forbidden to glue, because if the rain water enters the glue will cause to silica gel solidification, after solidification, there will be a honeycomb pore, cause leaks (water treatment is an important part of the).